- These empty refillable cartridges are super easy to fill using the provided syringe. They have an 80ml capacity.
- IMPORTANT NOTE : These cartridges are built with permanent-use chips that are designed to work in conjunction with the original EPSON chips. To begin using this system, you will need to have a set of 9 working (not empty) EPSON 3880 cartridges. Thanks to the permanent-use chips, once the system is installed, the chips will never again have to be replaced or reset, so no chip resetter is required.
- Note that the ink levels will freeze where they were once the system was first installed. However, the cartridges are transparent so it easy to see how much ink is really left in each cartridge. The included instruction manual will show you step-by-step exactly how to install the system.
- Product contents: set of 9 refillable EPSON Stylus Pro 3880 cartridges, 1 30ml syringe and needle, detailed instruction manual covering the whole process from start to finish
- For absolute best results, use only a pigment-based ink compatible and color-matched to the original K3 Vivid formulation used in the 3880. NAF-INK compatible ink for 3880 printers is available on NAFCOM.
Epson Pro 3800 3880 Waste Tank Chip Resetter
QE-589 chip resetter is applicable to stylus pro
3800/3800c/3880/3850/3890 maintenance /WASTE INK tank
The installation instruction
OPTION 1 (TWO WASTE TANKS AVAILABLE) It'd better prepare two pcs of maintenace tanks when using our chip resetter.
Because the 3800/3880 printer will record the data and the ink
level status when using the
maintenance tank.
a) When the first maintenance tank's ink level is low, use
WASTE chip resetter to reset it, then the ink level will be reset
to full status .
b) Install the second maintenance tank in the 3800/3880 printer, the second maintenance tank data and ink level will be recorded by the printer .Then the first maintenace tank data record has been removed.
c)When the second maintenance tank 'ink level is low, put the first maintenance tank in the printer. Then the maintenance tank is ready to work.
b) Install the second maintenance tank in the 3800/3880 printer, the second maintenance tank data and ink level will be recorded by the printer .Then the first maintenace tank data record has been removed.
c)When the second maintenance tank 'ink level is low, put the first maintenance tank in the printer. Then the maintenance tank is ready to work.
OPTION 2 (NO SECOND WASTE TANK AVAILABLE BUT DEAD EMPTY FACTORY
CART CHIP IS AVAILABLE). Use the original cyan chip to do the
reseting AND CHIP TAPE WE HAVE SUPPLIED.
a) Take out the maintenace tank chip when the level is down, then reset the maintenance tank chip.
b) Install the "Cyan" original chip to the maintenance tank,then put it in the printer, the printer will remark error.
c) Take out the maintenance tank and take out the "C" chip, install the reset maintenance chip ,
d) Install the reset maintenance tank to the printer.The reset maintenance tank will work .
E) RETAIN THE CYAN CHIP IN CASE YOU NEED TO RESET TANK AGAIN IN THE
FUTURE.a) Take out the maintenace tank chip when the level is down, then reset the maintenance tank chip.
b) Install the "Cyan" original chip to the maintenance tank,then put it in the printer, the printer will remark error.
c) Take out the maintenance tank and take out the "C" chip, install the reset maintenance chip ,
d) Install the reset maintenance tank to the printer.The reset maintenance tank will work .
PRICE : CONTACT US
Other Epson Catridges
0 komentar:
Posting Komentar